| Top | |
|
|
|
| gfloat | lower-frequency | Read / Write |
| gfloat | upper-frequency | Read / Write |
| GstAudioWSincBandMode | mode | Read / Write |
| GstAudioWSincBandWindow | window | Read / Write |
| gint | length | Read / Write |
GObject
╰── GInitiallyUnowned
╰── GstObject
╰── GstElement
╰── GstBaseTransform
╰── GstAudioFilter
╰── GstAudioFXBaseFIRFilter
╰── GstAudioWSincBand
Attenuates all frequencies outside (bandpass) or inside (bandreject) of a frequency band. The length parameter controls the rolloff, the window parameter controls rolloff and stopband attenuation. The Hamming window provides a faster rolloff but a bit worse stopband attenuation, the other way around for the Blackman window.
This element has the advantage over the Chebyshev bandpass and bandreject filter that it has a much better rolloff when using a larger kernel size and almost linear phase. The only disadvantage is the much slower execution time with larger kernels.
1 2 3 |
gst-launch-1.0 audiotestsrc freq=1500 ! audioconvert ! audiowsincband mode=band-pass lower-frequency=3000 upper-frequency=10000 length=501 window=blackman ! audioconvert ! alsasink gst-launch-1.0 filesrc location="melo1.ogg" ! oggdemux ! vorbisdec ! audioconvert ! audiowsincband mode=band-reject lower-frequency=59 upper-frequency=61 length=10001 window=hamming ! audioconvert ! alsasink gst-launch-1.0 audiotestsrc wave=white-noise ! audioconvert ! audiowsincband mode=band-pass lower-frequency=1000 upper-frequency=2000 length=31 ! audioconvert ! alsasink |
plugin |
audiofx |
author |
Thomas Vander Stichele <thomas at apestaart dot org>, Steven W. Smith, Dreamlab Technologies Ltd. <mathis.hofer@dreamlab.net>, Sebastian Dröge <sebastian.droege@collabora.co.uk> |
class |
Filter/Effect/Audio |
name |
sink |
direction |
sink |
presence |
always |
details |
audio/x-raw, format=(string){ F32LE, F64LE }, rate=(int)[ 1, 2147483647 ], channels=(int)[ 1, 2147483647 ], layout=(string)interleaved |
name |
src |
direction |
source |
presence |
always |
details |
audio/x-raw, format=(string){ F32LE, F64LE }, rate=(int)[ 1, 2147483647 ], channels=(int)[ 1, 2147483647 ], layout=(string)interleaved |
“lower-frequency” property “lower-frequency” gfloat
Cut-off lower frequency (Hz).
Flags: Read / Write
Allowed values: [0,100000]
Default value: 0
“upper-frequency” property “upper-frequency” gfloat
Cut-off upper frequency (Hz).
Flags: Read / Write
Allowed values: [0,100000]
Default value: 0
“mode” property “mode” GstAudioWSincBandMode
Band pass or band reject mode.
Flags: Read / Write
Default value: Band pass (default)
“window” property “window” GstAudioWSincBandWindow
Window function to use.
Flags: Read / Write
Default value: Hamming window (default)